WANTED

Wanted Main sail and Jib for 18 foot catamaran. Also need rigging. Top dollar for quality materials.Will consider 14 to 18 foot Hobie, Narca, etc. dhb2@mac.com

Wanted: 8 to 9.9hp 4 stroke, long shaft with alternator in very good to excellent operating condition- will consider corrosion, aesthetic challenges. Prefer in New England-Boston North if possible, I'm in Camden, ME. Thanks, Will -mainesail113@yahoo.com

Wanted: Bolger AS-29 or AS-39 plans to purchase. ccurtis@mval.net

Wanted: rudder assembly and any other parts for Chrysler Mutineer 15. Also anything to do with a Thundercat built by Snug Harbor Boat Works, St. Pete. FL. John jcandjc2@earthlink.net

Wanted: Lapstrake Fiberglass Dink - 7 ft. Contact 'J' bluoct@gmail.com

Wanted: 8hp longshaft 4-stroke outboard. 7-8' inflatable dinghy. email: mlhillis@mtwi.net or (406) 543-4125

Wanted: Sharpie schooner like Reuel Parker's Terrapin 42 or Chesapeake style ketch/bugeye about 40 LOD. komalley1@comcast.net

Wanted: Wooden decked sailing canoe with folding fan centerboard or dagger board (rather than a leeboard). Contact pbschwehm@gmail.com

Wanted: three or four new apprentices to start on a new boat building project in the central Texas area. No experience is necessary. Must be able to work one full day a week for about 3 months. There is no monetary compensation but each apprentice will receive the plans and manual/book at the end of the project. contact David Nichols davidboats@austin.rr.com

Wanted: Dingy main sheet traveler car and track plus relevant fittings for Gifford Jackons designed, MariSol Skiff. Send email and to jonathanbornman@gmail.com

Wanted: Bolger peapod Sweet Pea within 4 hours of Detroit. Email Ikapper@aol.com

I am looking for a set of second hand sails for a Mirror Class Dinghy. Anyone having a set can contact me at usafr@optusnet.com.au - Duncan F. Kirkley - Adelaide, South Australia

WANTED: Free used sails wanted for reuse as experimental material - I have several ideas I'd like to try out, and I think used sailcloth would be ideal. Will pay for shipping and offer profound thanks! - Mike Connelly - michael.connelly3@verizon.net

Missionary in Thailand needs free set of Drawings for donated Enterprise sailboat, also any other info appreciated. E-mail revstephenb@hotmail.com

boatbuilder from Latvia with 15 y.experience is searching position in MA prefered. Referenses. Wonder about skills? Write: alnih@yahoo.com

I would be interested in buying a Bolger AS 29 Sharpie in the US or Canada…Any conditions ok. Luc.granger@umontreal.ca

Wanted to purchase: Tolman Skiff.
Please reply with details to lowe_richard@hotmail.com

FOR SALE

Micro Navigator-like boat for sale - No keel, off centerboard, internally ballasted - Tanbark Martha Jane Balanced Lug - Built 3/8” MDO sheathed to waterline. Needs TLC on badly neglected bright work and plenty of other things to keep you busy. Trailer available but that will cost extra. Wil be cut up in June for lead and bronze fittings, sail is worth more than I’m asking. $500, takes her. Somebody save her, I don’t have a car capable of towing her anymore. Jason - stancil@vt.edu

Free Boat - 34ft. Double ended Dory Hull -  I need it gone so I can do something else with the space - J. Benford`s Sailing Dory "Badger" -  Suitable for M/V only - DF Mar. Ply & Epoxy - Decks are on and hull is sheathed - Stuffing box and prop shaft included - weighs approx. 3000 lb. - have pics - rkldude@yahoo.com - Shreveport, La.

Home built 18' 4" O/B cuddy cruiser w/trailer & bimini. 15 hp Honda 4-stroke w/electric start &remote controls. 3/8 "glued lapstrake meranti ply w/bronze fastners. Navman 4150 fishfinder w/depth, temp. and speed. Selway-Fisher hull design, my topsides design. 7knots top, 5 knots cruise. $6,000.00-OBO - Paul Ellifrit - kellifrit@socket.net

22' Cat Schooner Sharpie Home designed and built; lots of flare aft.  Marine ply, WEST epoxy.  3/4" bottom, 3/8" sides.  Always trailersailed and garaged.  Pro built unstayed carbon masts in tabernacles.  Full-battened sails.  3 hp Evinrude.  EZ Loader trailer with elec. winch and brakes.  Daggerboard, kickup rudder, 700 lbs internal lead ballast.  Located in Port Angeles, WA, (near Seattle).  This was a donation to the local Hospice.  I've never sailed it myself.  $2,500.   Posted Feb. 21,2008. PHOTO - Email for more pics.  gnjlepak@olypen.com 

33' Herrshoff Meadowlark - wood with fiberglass - 5'10" headroom, 2 berths, head, kitchen w/dinette - 9.9 Yamaha 4 stroke high thrust electric start in well, remote steering - 4 sails - Cambridge MD - $5900 - morse.d@comcast.net - photo

Lutra Laker - Boat only. Length 17’ 6’’ - Beam 48’’ - Draft 4’’ motor up – weight approx 125 pounds - 18.5 mph with 9.9 outboard - Rows well – Poles well - Handles very well under power - Glued lapstrake construction with all wood completely encapsulated with minimum 2 coats of epoxy - more information - Boat only $2800.00 Like new condition. Contact davidboats(at)austin.rr.com - photo - photo

1960 Cheoy Lee Frisco Flyer #745,25ft. sloop, teak clinker hull,
,spruce spars, sloop-bermuda rig, 3 sails-full batten main,yanmar diese-lfull keel, Pure Cheoy - built by Cheoy Lee yard in Hong Kong.
Folkboat design with full keel is very stable and a dream to sail. See pics - Austin, Tx. ,Lake Travis. $10,000,00/obo 512-785-6609 or email jste420@hotmail.com.

Bolger Windsprint built to plans except daggerboard on centerline, carbon fiber spars, Gambell and Hunter sail, bronze oarlocks, spruce oars, four life jackets and two throwables, everything brand new, never used. $2000 OBRO Bangor, Maine. Steve Rinker - devemaster1@yahoo.com

60's Klepper Aerius II two person folding kayak. Great condition other than the rubber hull, which is shot. Floats fine, but is no longer waterproof. The blue canvas deck is fine so it could easily be re-sewn with a new Hypalon hull. There are no tears. Frame is in excellent condition. Rudder - leeboard - sailing rig - paddles are included. San Diego County. Pictures - Scott@ucsd.edu

FREE ISSUE OF UNDER TEN FEET-a 10 page newsletter for dingys, tenders, and others. Subscriptions are $15 per year with a free issue to all Duckworks readers. Reviews include Catspaw Dingry, Jordan Dulcibella, McLeod One Sheet Skiff, Atkin Jan, and others. Contact sail389@aol.com, Paul Austin.

CLC MILL CREEK 16.5 double kayak, with BSD "Schooner Rig" and inflatable outriggers. Expedition quality sails, "Zippy Reefable". At 70 lbs, too much for us oldsters to cartop. Well below builder's cost at $2950. Located coastal NC. E-mail for pics. Jim Brown, (252) 393-6398 or cell (252) 723-2167. whitedove0215@yahoo.com

"JACKRABBIT", a John Welsford-designed Houdini - Merenti marine ply on white ash frames, epoxy encapsulated inside and out. 13.5' LOA by 5'10" beam - excellent shape - new dacron sail, galvanized trailer (with spare tire), cockpit boom tent. Located in Eastern Ontario - Asking $3800 (USD). Contact Burton Blais, Tel. 613-989-3517 (evgs), 613-759-1267 (days) or e-mail at bblais@mondenet.com or bblais@inspection.gc.ca

For sale: I have a set of full size plans for a Glen L 14, Along wit a alum mast, wood boom, and a full set of sails. very good condition. I planned on building one and I never got around to it. 200.00 or best offer. Utahsailing@gmail.com

ONE OF A KIND CATAMARAN Unique 38-foot cedar hull design with 50-ft rotating wing, teak decks, wood interior, retractable rudders and more. Light and FAST. Proven open ocean cruiser and liveaboard. Ideal for cruising or charters. email: uniquecat999@hotmail for pictures and details. Once in a lifetime opportunity.

New handcrafted CLC Chesapeake 17' wood/epoxy sea kayak. Fully outfitted and ready for the water. High gloss varnish finish with deck rigging, hatches and "Happy Bottom Pad" seat. Paddles as good as it looks. Tracks well and has excellent stability. Includes a handmade Greenland style kayak paddle. $3000 CDN obo. Contact Ed Driedger - ed_driedger@yahoo.ca.

A Phil Bolger Champlain, 22.5 ft. glasshouse launch. Plywood/epoxy construction. Built by owner, a professional cabinetmaker. Many custom features. Includes steel, double axle, custom-made trailer, built and designed by owner - shelter for same, 19’ x 24’. $32,000.00 negotiable. for info, contact hvanpelt@aol.com 1-613-267-9509. Photo

14' Pygmy Artic Tern built 2006. $1500. good condition, pinstripped and varnished. Contact Tim @ 903 586-8151. East Texas area.

Nancy's China Sailboat, see the exact boat & description HERE - I bought this boat a few years back from the builder and have only sailed it once... it's time to move on to some other adventure. The boat is on a trailer and is in excellent condition. Located about an hour south of Kansas City. Make Offer. Contact Brent at 417-448-1671, bcoursey@ineva.com

Bolger Martha Jane - fresh water boat as far as I know - from Minn. sails & 9 hp ob - not run in past 3+ years. tandem axel trailer (no brakes) lights?-will need tires. Boat needs water ballast tanks rebuilt and new Mizzen mast and boom. $2050.00 - Bob Archibald P.O.Box 933 Steinhatchee Fl (352) 498 2111

Mast and booms, sails and rigging for a 32ft.boat. Condition is useable but not perfect. Some of the sails are cotton, some dacron. I can trade for an old running seagull or sell for $300. You can pick up near cleveland, Ohio. gcmarsh1@juno.com. or call 440-365-5007 ask for steve, or leave a message..

For sale: British Seagull Silver outboard $200.00 obo. Engine is too big to use as a kicker on the Lazi Dawg. Will ship at your expense. Questions: call Paul "Graybeard" Paine at (918) 633-6350

9’ 6” sailing pram, John Gardner design. Nice tanbark sail, mast, leeboard, rudder, all in good shape. Ash frames with AC exterior ply, seams are glassed. Well maintained over the years. Built in 1992 and Still hits the water on occasion. Will take up to 3hp and rows well too. Good sailing training for child. Located Toledo, Ohio area. Contact Skiffsalor2000@yahoo.com. No trailer. $800 takes all.

16 Foot Gloucester Light Dory. Philip C. Bolger Design/Gloucester, Massachusetts. Location: Duluth, MN. Handcrafted by local boatbuilder. Includes custom oars with brass oarlocks. Spectacular boat in excellent condition. Price: $4000 Firm. vlafnp@aol.com

oughtred wee rob - glued okoume lapstrake. just finished - classic open rail, no decks, stout breasthooks, backrest, brass rubrail. oiled inside, system 3 wr-lpu out in whidby white. - well built - double paddle - boat located in WA, 4 hrs from seattle - $2000 - jan@fivenineclimber.com - 509 429 2196

Fall Blow out.Sawyer Recreational Tandem Must sell 16'x 35" Like new. White gelcoat, bucket seats. $555.00 or make a reasonable offer. hoz49@hotmail.com

Glen-L Knight cabin cruiser 18.5' x 8' beam hand-laid fiberglass over 15/16" mahogany. With new Mercury 115 hp four stroke EFI w/hydraulic lift plate, and MinnKota Turbo 90 4WD trolling engine. Shoreland'r tandem axle roller trailer. Milwaukee WI, asking $25,000, $20.000 - will consider other offers. Lisa McGraw: L3mcgraw@aol.com or (414) 573-3451.

Lightweight canoe outfitf: a 12-foot green aluminum canoe (Radisson) - 33 lbs; a "Cruise-n-Carry" 1.5 horsepower outboard engine - 12 lbs; two paddles that double as oars; two oars; a folding anchor; life jacket and a brand new life vest; one bow dolly; manual for engine; Price: $395.00 Contact at charles.river@rcn.com Located in Newton, MA.

MAGAZINES-1000's available (many complete years) - variety of US/UK mags from the 1940's forward, on boat building, design, sailing etc. including: Small Boat Journal, Messing About in Boats, Sail, Cruising world, Yachting, Motor Boating, etc. Most are in very good to near new condition- reasonable prices for one or many. Will - mainesail113@yahoo.com

I have a new Sawyer GoldenGlass tandem canoe for sale. This boat has never been in the water! approx 60# 16'x31" natural cane seats. Immaculate. Retail $1350.00, asking $850.00 or make an offer. hoz49@hotmail.com

S.F. Pelican Sailboats - We build the classic San Francisco Pelican, Great Pelican and also provide kits and parts. Contact Jeff at The Boatshop at Stillwater, Box 848 Veneta, Oregon. (541) 337-8248, or email: tritoncapt@yahoo.com

Albin 25 for sale. located east central florida. needs engine, on trailer, hull good condition with aft cabin and hard top. $7,000 obo 772 979 4293 John Bartlett.

- PRICE REDUCED TO $5000 - $4800
1988 Classic New Haven Sharpie 18'x5' open day sailor w/round stern, 3 mast steps, ex. galv. trailer. Built to highest standards in marine ply, glass/epoxy, sassafras superstructure. Total refurb. this year. Brand new cypress floorboards. Original owner has sailed her a thousand miles and she is as sweet as they get...and ready to go! $5750. obo. Possible delivery in S.E. - photo david.thomasson@state.tn.us 865-481-3032 (daytime).

S.F. Pelican Sailboats - We build the classic San Francisco Pelican, Great Pelican and also provide kits and parts. Contact Jeff at The Boatshop at Stillwater, Box 848 Veneta, Oregon. (541) 337-8248, or email: tritoncapt@yahoo.com

Apprentice wanted - a few hours a week or more - must be willing to work for knowledge as pay - I'll make sure that it is more than a fair exchange - David Nichols, designer, builder and WoodenBoat School instructor - Austin, Texas

1986 Mercury Sailpower outboard 2 stroke. Extra long shaft (25"). Original power head (9.8 hp) replaced with 1998 head (15hp) by master mercury mechanic in 2004. Run several times a week for the last year. A reliable and strong motor. Located in N.E. Florida. $600.00 firm. Call Stan for more info or demo. 904-333-7457

I have a Glen-L Carioca hull finished and would like to sell it with all the plans and extra lumber. I have enclosed a picture. I would appreciate and help in selling the hull it is for a high school Building Trades class fund raiser - Dennis Hom - Oak Ridge High School - 27330 Oak Ridge School Rd - Conroe TX 77385 - 281-298-3232 - picture1 - picture2

"MAKO" - This is a brand new, custom designed, one off hybrid wooden touring kayak. Hand built, with care by amatuer builder with 30+ years of woodworking experience. See photos for specs. In Newport, NH. $2300. contact garyndeb@interdial.net.
Photo1 - Photo2 - Photo3

Seattle - 16' Jim Michalak design Jonsboat - new custom trailer - s matching fold/swivel seats - new pole holders, bow light, removable helm light, Aux floor light,and a neat Chris Craft cleat on the bow - finished with marine paints. Includes DT-15 Suzuki motor - Trolling motor not included, but may be purchased seperatley - full flotation built into the seats and under the bow - asking $1200.00 - donaldjgraham@hotmail.com - photo1 - photo2

Unique Bolger 30-foot sailboat for sale. Balanced/dipping lugger. Two mains plus storm sail. One-of-a-kind wing pivoting keel. Two berths, weighs about 5,500 pounds, sail area 385. 6 hp. Johnson moves at about 6 mph. LED interior lights, solar panel, autopilot, GPS, more. On Florida Big Bend. Needs right owner. $6,000. Contact Gary Blankenship