Slot and Tab Canoe

Dear Chuck!

My good friend naval architect Morten Olesen from Denmark too (, drew up a 18 footer slot & tab canoe for me, I cut the parts on a CNC router, but did not build the boat myself (another one did) anyway I attach some pictures of the project, the seats and paddles were also part of the package, it is a very stable canoe.

It is difficult to descripe these pictures, it could be as following: Here is the packaged cut on CNC router - panels glued with butt straps. This picture shows the dry assembled canoe, it took only about 30 minutes before the boat was 3D. the seats is a part of the packaged, here is the nearly completed canoe etc. etc.

Best regards
Claus Bak - Denmark