hello there "chuck"
hows things going with ya there in texas? keeping warm i hope
not so hot here as of late. cold winds a blowing and with the
time change coming it will seem like winter is near by? i have
all the bulkheads cut out for the a4breve now just waiting for
some epoxy to get here from clark/craft. after looking over
the plans i have made a lil change. i like a lil more room so
i straighten out the rear of the boat from the main bulkhead
14 to the transom. this will give me a lil more room in the
seating area i feel? also on the sides i'am useing 3/8ths ply.
not 1/4 thus beefing up the sides. the first boat i built i
used 1/4 ply and i was not to happy with it. the 1/4 ply they
have here is just not that good more for underlayment. if all
goes well i want natural wood look on the outsides and decks
of the boat.
well chuck just wanted to say hello you take care.
your friend in illinois "bill"
hows you doing today good i hope? thought i might send ya a
few pic. of my work on the a4 not much to look at yet but it's
comeing along. bill
HELLO THERE "CHUCK"
HELLO MY FRIEND HOW'S THINGS GOING THERE OK I HOPE.?
NOT GOING WELL HERE HAD ACCIDENT HERE THE OTHER DAY BIG TIME<<
I WAS WORKING ON THE BOAT AND STANDING ON A LADDER AT THE TIME
WHEN ALL OF A SUDDEN A RUNG IN THE LADDER BROKE. THIS CAUSED
ME TO FALL INTO THE BOAT IN FALLING I HIT THE MAIN BULKHEAD
AND THE RIGHT SIDE OF THE HULL. THEY CRACKED LIKE A GUN GOING
OFF. BOAT AND ME SUFFERED DAMAGE TO SAY THE LEAST> MORE BOAT
DAMAGE THAN ME. THOUGHT AT FIRST I BROKE A FEW RIBS BUT FEEL
BETTER TODAY. AFTER THE DUST CLEARED I ATTEMPTED TO FIX THE
BOAT BUT TO NO AVAIL. ITS OFF TO THE SCRAP PILE FOR IT (SAD
TO SAY). AFTER SOME THOUGHT I THINK I WILL ORDER SOME NEW PLANS
FROM YOU (HEAL UP) THEN START A NEW ONE. WILL BE SENDING YOU
A MONEY ORDER IN A FEW DAYS FOR THE>>>TWISTER PLANS
WILL GIVE IT A TRY.
WELL BETTER LET YA GET BACK TO WHAT YA WAS DOING.
BYEEE FOR NOW "WILLIEP"