WANTED

Am looking for  a copy of a  set of plans that originally came with the COSINE WHERRY BOOK by J.D. Brown ( Rip, Strip, Row)
design_mark@mac.com

28’ Dave Gerr-designed offshore skiff in good condition.  Mike Hillis (406) 543-4125 or mlhillis@optimum.net

Kismet 31 trimaran or K24 catamaran building plans.  dblowers65@yahoo.com

I'm looking for a copy of New Zealand Backyard Boatbuilder by John Welsford Email contact bobzondeck@telus.net Thanks.

Wanted--Four stroke, long shaft outboard motor 8hp  to  10 hp. Stan Roberts - phone: Five One 2    Four 7 0   Three 3  Two 2

INFORMATION WANTED: does anyone know the current whereabouts of the original SHARPSHOOTER, 23.5foot OB utility, designed by Phillip Bolger?  responses to: texasnative46@gmail.com   THANK YOU for reading this, tex

a complete set of control cables & motor control box, suitable  for a 1963 HOMELITE 55hp outboard motor - responses to: texasnative46@gmail.com  PLEASE price your goods in first email. thanks, tex

Wtb bolger family schooner plans - Grove777@aol.com

Wanted-Emblem for the cover of a '58 Johnson Seahorse 18 Hp outboard. It's oval 5"x2".they were on the 57 also. Greg/forked river nj.609 312-7490

Wanted-Harness to plug into a '57 Johnson Seahorse 35 Hp outboard. I'm sure I could run a push button starter switch, but would like to make it easy. Greg/forked river nj.609 312-7490

Wanted-Rudder, tiller, and centerboard (or photos/plans of them) for a Skipper 14 I am restoring. Also needed are any photos detailing the rigging. Tim - vanmantim@aol.com or 717-756-6933

used, 12-16 ft wooden rowboat with oars Contact Indrek at (514) 670-0122 or turak!@aei.ca

Services

Mobile Rigging Service-Tampa Bay and Beyond: New and Replacement Rigs and Spars, Seasonal Commissioning and Inspection, Running & Standing Rigging, Lifelines, Furlers, Deck Hardware, Electrics and More. We are a FULL SERVICE COMPANY. Also offering "Rigging 101 for Sailors" Course. North Atlantic Rigging Company NARigging@yahoo.com 207 930-5257

Canvaswork - biminis, sail covers, cushions - have machine: will sew - also Pelican sailboats = rudders, spars, sails, kits or finished boats.
Ratty’s BoatWorks - Creston NC 28615 - 336.385.1498 - shipe@skybest.com

S.F. Pelican Sailboats - We build the classic San Francisco Pelican, Great Pelican and also provide kits and parts. Contact Jeff at The Boatshop at Stillwater, Box 848 Veneta, Oregon. (541) 337-8248, or email: tritoncapt@yahoo.com

Fine Art Prints - Wooden Boat Photos
http://wooden-boat-pictures.com/

LUCKY DUCKS! Get your pair of Lucky Ducks. Each Lucky Duck is solid, with a beautiful glaze finish, 5.5cm long and weighs 0.010g. One pair is only $9.99US & includes FREE international postage (7-10 working days). Email: aysbutler@yahoo.com

WANT TO TRADE

 full set of ten discs of "The Art of Lofting" featuring Maine boatbuilder Arno Day - Will trade for a set of plans for a 16-22 ft daysailer - most interested in Paul Fisher's designs such as Grey Swan but other designs would be considered. Ed Engarto

For Trade; Full set of lofting videos (ten CD's), used once and near new. I have the Arno Day set of CD's for trade for a set of plans for a 14-20 foot sailboat or outboard utility boat. Any of the designers on DW are fine as well as Glenn-L, Chesapeake Marine, Atkin. Send offers to stonybrook@stny.rr.com

FOR SALE
(click images to enlarge)

I've got a full set of spars for a Bolger Micro For sale both main and mizzen.  They are in good shape but are due a re-varnish.  Located in Central Arkansas.  $300 obo.  For more info send an email to ken_J_@hotmail.com

Bolger Birdwatcher 2 - 2008 23’6” - 2009 Aluminum Road King trailer. Solent lug rig with jib. Meranti Bs1088 plywood construction, Philippine Mahogany framing - coke bottle green lexan house, West System epoxy. Anchor, bumpers, Outboard - Featured  in May/June 2011 issue of Small Craft Advisor.  $9500. Pictures upon request.  Located Spring HIll, FL Rex Payne 317-626-1973 - rkpayne96@yahoo.com

Catboat - Rhodes Design - (East Northport Long Island) - RHODES CATBOAT 13 ½' - WOODPUSSY DESIGN - 1950'S MODEL -- RESTORED - FIBERGLASS - NORTH SAIL - (used about 6x) - EVERYDAY SAIL - WOOD SPARS - STAINLESS RIGGING - "MAGIC TILT" TRAILER - READY TO SAIL - $4750 - Contact Andre - (631-368-8253 - santone@optonline.net )

2 complete sets of unused plans:
Devlin Surf Scoter 22 $75
Bateau Down East Cruiser $50
No boat has been constructed using these plans.
Contact psheahan@pacbell.net if interested

Gulfcoast 18 - 1976. Located Texarkana, TX. On almost like new galvanized trailer. Hull recently painted with aircraft epoxy, two coats primer, two coats color. Ready to sail. Photos upon request. Firm $1,500. Call for details - Ray Whitney (903) 792-3380 - Cell (903) 733-7743, or raywhitney@valornet.com

Flapjack 14-Steve Redmond designed rowing/sailing dinghy. Oars/sails/mast/trailer. $1800. Astoria,OR, wmstenberg@aol.com

Greenland-style 17 ft skin-on-frame kayak for sale, used, $600.  Excellent condition.  8 oz dacron skin over a heavy, yellow pine and oak frame.  Tidewater Small Craft, www.tidewatersmallcraft.com, or tg3613@cox.net

SKERRY, Chesapeake Light Craft built from kit.  Excellent condition. Varinshed interior, painted exterior. Only 100 lbs.  Kit costs $ 1,250.  Here is a completed boat for the same price.  What a deal!  Located on Washington Coast.  Contact owner/builder for further information.  bobtoshi@centurytel.net.  

19’ Atkin XLNC design. Strip planked with Port Orford Cedar and epoxy.  Long, lean light and fast.  8 HP pushes it 12 + knots.  Motor not included.  Located on Washington Coast.  Contact owner/builder for pics. & specs.  $ 1,750.  bobtoshi@centurytel.net

21’x6’x1’ Leeboard Sloop. 2,000 lbs. Displ.  Easily trailerable. tabernacle mast.  Galv. trailer available.  Douglas Fir plywood & epoxy.  excellent condition.  Queen size berth, wood stove, porta potti, compass, GPS, sounder, vhf, 8 HP Honda in well, elect cabin & running lights. North sails. Design developed from Garden design. Awarded “Best Small Sailboat” at Seattle Wooden Boat Show. Contact owner/builder for pics. & specs.  $10,000 - bobtoshi@centurytel.net

18' Norwalk Islands Sharpie  Launched in 2001.  Great boat for exploring shallow water, but seaworthy enough head offshore.  Closely built to Kirby's plans with Marine Grade Fir, epoxy and fiberglass.  Carbon Fiber mast, Ash oars.  Bunk trailer.  Complete equipment list at http://www.melantho.com/ForSale.aspx.  $3500. forsale@melantho.com

12' custom Glider rowing catamaran. Mahogany and spruce construction. Sliding seat, outriggers, and 9' spruce and mahogany oars. Great for exercise, and also works well with a 2 hp outboard. Like new condition.  $500 South coast Mass. (508) 636-8532 mwgumprecht@comcast.net

Various boat plans (no boats were made from these)

• Honker 18 Garvey (Sam Devlin) $40 (sold)
• Grey Swan Power Version ONLY-no sail stuff (Selway-Fisher) $30
• Kayleigh 18 Power Sharpie ( Tracey Obrien) $20

The price of each plan includes mailing inside USA-Outside USA is extra $ - Can do Paypal. I'm near Astoria, Oregon, USA - woldwillie@yahoo.com

Johnson outboard 3hp  1964 - Excellent cond. Refurbished by Lockemans hardware Detroit Mi 2001. New Impeller, Waterpump Grommet, and Driveshaft O ring. Origianl owners manual, spare prop. Call for appt to hear run. Phone# 734 - NineThreeFour0twothreefour

Bolger Diablo - with trailer. This the Diablo named "Halcyon" featured in Jon Kolb's website "Adventures in Boatbuilding". The boat and trailer are in excellent condition, ready to embark on your own adventures.  Please visit diabloforsale.yolasite.com for details, contact information, 9 photos, and current asking price.

Remember Tinkerbelle, the famous little sloop that crossed the Atlantic in 1967? Here is a close copy, an Old Town Whitecap dinghy, decked over with cabin, mast in tabernacle, larger steel centerboard and tip-up rudder, trailer. Ready for paint and sails. Will sell cheap as is and complete for buyer. Mason Smith 518 624 6398

brand new LF Herreshoff Prudence 23 Hull, in the included hull mold, on a trailer - Spring Hill Florida. would give someone a chance to enter the Herreshoff boat world and build their own vessel and make new ones - for info, please contact mark@pendragonmusicworks.com - seller is very motivated - photo is of sistership

Wooden Mast and Boom - $575 (Long Island NY) - Stored indoors; no rot or damage but needs to be refinished. Mast dimensions: Height 17' 6 1/2 ".... Diameter 3 1/2" ....Width 2 1/4 " - Boom dimensions: Length 8' 4".... Diameter 1 3/4".... Height 3 1/2 " - Boom is tapered to 2/5/8" at tack end and 2 1/2" at the clew end. - Call Andre ... 631-368-8253

Bolger Micro Navigator Project for sale.  I estimate that it's 85% complete with most of the supplies to finish.  Email for more info and pictures.  The boat comes with trailer as well.  I've got $650 in it and would like to get as close to that as possible.  It's located in Benton, Arkansas.  ken_J_@hotmail.com

1973 Phil Bolger 31 ft Folding Schooner, one of 3 prototypes built by Herb / Dynamite Payson (has builders plate on boat), 5 sails in great condition, nice trailer with new tires, bowsprit, 2 rudders and 2 sets of daggerboards. re-painted recently, very good condition. A rare boat built by Payson, designed by Bolger.....your chance to own a classic. Email for further details and photos. $2000 in NE Ohio. Jerry - email: jrwelch58@gmail.com

Drafting mylar. I have 32' and 42" mylar drafting film for sale. X-heavy weight, matte finish, tough and durable. Wide enough for lofting a 64" beam boat (32") or an 84" beam boat (42") or anything smaller. Contact for prices for your required amount. - ArkoderKrieger@aol.com 

New and unused construction plans.
Sam Devlin 16' Tug Godzilli $75.00
Karl Strambaugh Catbird 16 sailboat $40.00
Call 541-504-0135

a set of Jim Michalak Sow's Ear plans, all permanent bulkheads epoxied together and both 1/4" side panels epoxied and cut to finish size. Would like to get my material expenses back around $225. Parts are located in Wisconsin in the Milwaukee area. Greg 262 895 6989

20' aluminum mast for sale with rigging. supposedly came off a Ghost 13. Mast has fore and side stays, and main halyard. 2.25"x3" cross section. $150 or best offer. In the Tyler TX area. Could meet within 20 mile radius. 903-539-3230.

18 foot fiberglass lapstrake dory - with motorwell, needs rub rail and minor fiberglass repair, no trailer - will sell for best offer - grove777@aol.com - or call 361 442 9351

10" Pram - Quality built pram, with variable-V bottom, nearly flat in center with sharper ends.  Rows very well and has good capacity.  Actual size about 9' 7" by 51" by 16".  Excellent condition.  $1,000  Coeur d'Alene, Idaho.  e-mail for photos.  jjbyler@aol.com  (208) 772-7442

Montgomery 17, 2008  - Dacron Mainsail,108% jib, 80% jib, storm jib - Ida sailor kick up rudder and roller mast crutch., LED portable running lights, Bottom paint with interlux barrier coat, Marine potty never used, 2011 Dihatsu 6hp less than 5hrs, Pacific trailer pvc keel guides - located Stillhouse Lake Marina, Belton, Texas - Pix on request -
Email chuckbeme@yahoo.com

15' traditionally built 2010 Faering - Yellow cedar and white oak. Copper and bronze fastened. Comes ready to row/sail with sprit sail, mast, rudder, tiller, oars, floor boards and trailer. $5000,  360-510-8502

Bolger design #492 "Slicer - 30-ft open skiff, built 2003, fiberglass w/ Coosa foam core, unsinkable, 18 ft of unobstructed hold. See BWAOM, p.87. Custom trailer, bimini, bug-proof camping tent. 15hp Yamaha 4-stroke, Ezy-glide (TM) remote steering. $8500. Ed Haile, 804-443-4813, ewhaile@hotmail.com, VA.

Old dreams for sale; Never-used boat plans:
8 foot Gougeon Dinghy - $35.00
12.5 foot Bolger Bobcat $50.00
Uffa Fox Lively (16') Daysailer $50.00
Gougeon A-class catamaran $35.00
Cosine Wherry (14'2") Book and Patterns $40.00
Tanton 24 foot water-ballast sloop $100.00
Call Herman @ 252-637-9656

Glanders Cay 23 foot full keel bare hull.  Comes with new mast, new sails, new rigging, bowsprit, boomkin, rudder and 8 opening ports with screens. Located in Dayton, Ohio area.   For sale or trade.   $700.00    937-308-2114

For Sale: Sea Eagle 16.5  Beautiful like new Custom built  wooden beach cruiser. Launched in 2009.  6 HP Mercury 4 stroke in motor well. Info and photos at  www.arrowheadboats.com/ latest news. Trailer included $8000.00 Located Texas.  Ready to go for the Texas 200 davidboats@austin.rr.com

Joel White-designed professionally-built CATSPAW dinghy.  Carvel planked cedar on oak, sapelle gunwales and inwales, cedar floorboards. 65 sq ft sprit rig by NW Sails. Interior oil/varnish, exterior Interlux Enamel.  Boat is 12'8" overall with a 4'5" beam, draws 6 1/2 inches board up and 20 inches with the board down, weighs abt 175 lbs. $8500. Bruce 360-301-3410 or litespeeddeathride@gmail.com - Photo1 - Photo2 - Photo3

Monomoy Whaleboat - built to 1934 Coast Guard Monomoy (lifeboat) design. Fiberglass construction with teak seats, gunnels, and decks.26 feet long, 2000 lbs, 7' 2" beam, built for racing. $26,000 OBO. located Vallejo California. See FLYER -Watch Video

two sets of plans - both sets are from Jaques Mertens. One is for the Outboard Dory 18 and the other is the LB22. No boats were ever built from these plans so the buyer will have clear rights to build from them. Ill take $50 for the OD18 and $70 for the LB22. Bill Bronaugh arkoderkrieger@aol.com

Bolger Light Dory - hardly used, needs a bit of a clean up but in good condition Could add flotation,would be excellent exercise row boat, min camp cruiser  $500  Perth W Australia ph 0438085906

Footloose dinghy, Jordan design.  Not finished but not much to finish, with plans.  Would make excellent camp cruiser. Could carry plenty of gear, built with marine ply  Excellent value  Never been in the water  Solidly built $800
Perth W Australia ph 0438085906

Bolger Cartoon 40   Bulkheads, transom, stem patterns, unbeveled stem, and lofting for 19’-5” version of this daysailer. Bulkheads tropical veneer 1/2" exterior-glued ply framed with full 1" CVG Doug fir (stout!). $300 provides huge head start for this build.  Pick up in central Colorado.  Contact jon@kolbsadventures.com

For Sale: 14' Cosine Wherry. Cedar, mahogany and ash with finished bright work in and out. Includes bronze oarlocks, 2 pairs of laminated spoon oars, anchor, custom built tilt trailer, canvas winter cover. Also includes set of moulds and jig. Excellent workmanship. $5,000.00 Cdn. Contact Marisa at mcstrban977@yahoo.com. Ontario, Canada --

Plans for Sale-unused, as new, unbuilt:
Ness Yawl paid 200, yours for 110.00, cont US shipping included
Atkin shoal draft leeboard cruiser, Gretchen paid 65, yours for 35, cont US shippping included David - desq@verizon.net

Boatbuilding Library for sale.  Over 30 books, mostly on wooden boats.  Contact me for list - Chris at chrsmorrill@yahoo.com

Unique Bolger 30-foot sailboat for sale. Balanced/dipping lugger. Two mains plus storm sail. One-of-a-kind wing pivoting keel. Two berths, weighs about 5,500 pounds, sail area 385. 6 hp. Johnson moves at about 6 mph. LED interior lights, solar panel, autopilot, GPS, more. On Florida Big Bend. Needs right owner. $6,000. Contact Gary Blankenship